Westech Model WTA122-126-HXO

Features:

• Aluminum Cross-Flow fixed plate heat recovery exchanger
• DWDI BI Supply air fan
• 20 HP TEFC high efficiency supply fan motor
• SWSI BI Exhaust air fan
• 15 HP TEFC high efficiency exhaust fan motor
• 368 kw copper tube aluminum fin glycol preheat coil
• 119 kw copper tube aluminum fin glycol reheat coil
• Copper tube aluminum fins DX cooling coil
• Automatic motorized aluminum air-foil blades supply and return air dampers c/w by-pass
• Supply and return air filter assemblies
• Magnahelic filter guages
• Marine style lighting
• Two water wash heat exchanger spray manifolds installed and piped
• Pre-wired and piped water wash cabinet c/w all controls and valves
• Unit mounted control panel c/w disconnect and starters
• 2" rigid interior linacoustic insulation
• Ventlock door handles
• Bubble style door gasket
• Unit interior and exterior etched primed and top-coated with a minimum 2 coats Alkyd Enamel

Horizontal Packaged Heat Recovery System North Slave Correctional Facility Supplied to: PCL Constructors Northern Inc.

Click image to view larger:

Model WTA660-750-SHPO Features: 8" Channel base frame 3/16" Steel Checker plate floor 2" Linacoustic Insulation 16 Ga casing 24 GA lining 3 IMC preheat coils 3 IMC Reheat Coils Motorized Inlet air damper Manually operated Return air dampers Unit mounted flanged steam supply and condensate piping 3" diameter drains on each side of coil Bulkhead lighting in each section Stainless steel fan guards 100 HP TEFC fan motors Unit mounted Control Panel with disconnect switch and fan motor starters Screened outside air inlet cowl Magnehelic filter guage Condensate return duplex unit All traps, strainers, check and shut off valves Interior and exterior prime painted and exterior casing a minimum of two coats of Epoxy paint

Horizontal Outdoor Air Handling Unit 75,000 CFM Capacity. Grande Prairie Optimization Project Supplied to: Weyerhauser Canada Ltd